PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HE265-0012-0011
HE265-0012-0011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, special_features: BLACK, style_designator: STANDARD, end_item_identification: 3990-01-444-6174 BITUM DISTRIBUTOR, hole_accommodation_diameter: 0.500 INCHES NOMINAL IN, material_accommodated_thickness: 0.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-120-7315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HE265-0012-0011
NSN: 5340-01-120-7315
FSC: 5340
CAGE: 89372 — ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
special_featuresBLACK
style_designatorSTANDARD
end_item_identification3990-01-444-6174 BITUM DISTRIBUTOR
hole_accommodation_diameter0.500 INCHES NOMINAL IN
material_accommodated_thickness0.125 INCHES MAXIMUM IN
NSN5340-01-120-7315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HE265-0012-0011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL ACCOMMODATED THICKNESS: 0.125 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
HOLE ACCOMMODATION DIAMETER: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL ACCOMMODATED THICKNESS0.125 INCHES MAXIMUM IN
END ITEM IDENTIFICATION3990-01-444-6174 BITUM DISTRIBUTOR
MATERIALPLASTIC POLYAMIDE NYLON
HOLE ACCOMMODATION DIAMETER0.500 INCHES NOMINAL IN
SPECIAL FEATURESBLACK
STYLE DESIGNATORSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
309620Upgraded Successor
successor cross-reference
successor
309664Upgraded Successor
successor cross-reference
successor
BF309620Upgraded Successor
successor cross-reference
successor
2643Interchangeable
interchangeable cross-reference
interchangeable
2-541Interchangeable
interchangeable cross-reference
interchangeable
6674Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HE265-0012-0011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HE265-0012-0011?
HE265-0012-0011 is a BUTTON,PLUG.
What parts can replace HE265-0012-0011?
There are 22 known substitutes for HE265-0012-0011: 309620, 309664, BF309620 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HE265-0012-0011?
HE265-0012-0011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-120-7315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HE265-0012-0011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026