PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HE162-0002-5001
HE162-0002-5001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.200 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.063 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-922-6140, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HE162-0002-5001
NSN: 5340-00-922-6140
FSC: 5340
CAGE: 89372 — ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS (USA)
SPECIFICATIONS
diameter0.200 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.063 INCHES NOMINAL IN
loop_inside_diameter0.294 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
material_document_and_classificationAMS 4035 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
NSN5340-00-922-6140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HE162-0002-5001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
LOOP INSIDE DIAMETER: 0.294 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4035 ASSN STD SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
MATERIALALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER0.294 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4035 ASSN STD SINGLE MATERIAL RESPONSE BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.780 INCHES NOMINAL IN
DIAMETER0.200 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
S746205Interchangeable
interchangeable cross-reference
interchangeable
X101Interchangeable
interchangeable cross-reference
interchangeable
B107.600 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
RE-52Interchangeable
interchangeable cross-reference
interchangeable
359-SInterchangeable
interchangeable cross-reference
interchangeable
17107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HE162-0002-5001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HE162-0002-5001?
HE162-0002-5001 is a CLAMP,LOOP.
What parts can replace HE162-0002-5001?
There are 18 known substitutes for HE162-0002-5001: S746205, X101, B107.600 TY1CL2 and 15 more. Substitute compatibility should be verified for your specific system.
Is HE162-0002-5001 still available?
HE162-0002-5001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HE162-0002-5001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026