HDB-202P5 7/13 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

HDB-202P5 7/13: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_shape: STRAIGHT, bore_diameter: 15.0 MILLIMETERS NOMINAL MM, overall_width: 11.0 MILLIMETERS NOMINAL MM, alignment_type: RIGID, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-019-2219, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HDB-202P5 7/13

NSN: 3110-01-019-2219
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)

SPECIFICATIONS

material	STEEL COMP E52100 OUTER RING
bore_shape	STRAIGHT
bore_diameter	15.0 MILLIMETERS NOMINAL MM
overall_width	11.0 MILLIMETERS NOMINAL MM
alignment_type	RIGID
load_direction	RADIAL
surface_finish	GROUND
special_features	FRACTURED OUTER RING WITH TWO HOLIDNG RINGS OF 17-4PH CRES; STABILIZED FOR OPERATION FROM -65.0 DEG F TO +350.0 DEG F; DEMAGNETIZED BEFORE FINAL CLEANING,NOT TO EXCEED 5.0 GAUSS DEGF
style_designator	NON-LOADING GROOVE, NON-SEPARABLE
internal_clearance	0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
lubrication_material	OIL
special_test_features	NOISE AND VIBRATION TESTED
NSN	3110-01-019-2219

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

LUBRICATION MATERIAL: OIL

•

INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN

•

SURFACE FINISH: GROUND

•

SPECIAL TEST FEATURES: NOISE AND VIBRATION TESTED

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
LUBRICATION MATERIAL	OIL
INTERNAL CLEARANCE	0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
SURFACE FINISH	GROUND
SPECIAL TEST FEATURES	NOISE AND VIBRATION TESTED
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION	SAE 660 ASSN STD SINGLE MATERIAL RESPONSE RETAINER

SUBSTITUTES & CROSS-REFERENCES 2

3501156-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

358246Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HDB-202P5 7/13?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HDB-202P5 7/13?

HDB-202P5 7/13 is a BEARING,BALL,ANNULAR.

What parts can replace HDB-202P5 7/13?

There are 2 known substitutes for HDB-202P5 7/13: 3501156-1, 358246. Substitute compatibility should be verified for your specific system.

What is the NSN for HDB-202P5 7/13?

HDB-202P5 7/13 is cataloged in the U.S. Government catalog under NSN 3110-01-019-2219. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HDB-202P5 7/13 — BEARING,BALL,ANNULAR

Request a Quote — HDB-202P5 7/13