PartsTable / COMPONENT / HD535
HD535
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.250 INCHES NOMINAL IN, aperture_width: 3.125 INCHES NOMINAL IN, overall_length: 31.500 INCHES NOMINAL IN, aperture_length: 30.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-9103, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
HD535
NSN: 5330-00-599-9103 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material CORK OVERALL hole_diameter 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 4.250 INCHES NOMINAL IN aperture_width 3.125 INCHES NOMINAL IN overall_length 31.500 INCHES NOMINAL IN aperture_length 30.375 INCHES NOMINAL IN special_features 0.281 IN.FROM OUTSIDE EDGE TO CENTERLINE OF BOLT HOLES ALONG THE WIDTH AND LENGTH IN style_designator NON-CIRCULAR bolt_hole_quantity 28 inside_corner_radius 0.688 INCHES NOMINAL IN outside_corner_radius 1.250 INCHES NOMINAL IN cross-sectional_thickness 0.094 INCHES NOMINAL IN NSN 5330-00-599-9103
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: HD535
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE LENGTH: 30.375 INCHES NOMINAL IN
• OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 1.125 INCHES NOMINAL IN
• HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION OVERALL LENGTH 31.500 INCHES NOMINAL IN APERTURE LENGTH 30.375 INCHES NOMINAL IN OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 1.125 INCHES NOMINAL IN MATERIAL CORK OVERALL OVERALL WIDTH 4.250 INCHES NOMINAL IN SPECIAL FEATURES 0.281 IN.FROM OUTSIDE EDGE TO CENTERLINE OF BOLT HOLES ALONG THE WIDTH AND LENGTH IN HOLE DIAMETER 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN APERTURE WIDTH 3.125 INCHES NOMINAL IN BOLT HOLE QUANTITY 28
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
4058 Interchangeable interchangeable cross-reference
interchangeable
107B634 Interchangeable interchangeable cross-reference
interchangeable
4004058 Interchangeable interchangeable cross-reference
interchangeable
2840PL0664250 Interchangeable interchangeable cross-reference
interchangeable
24681 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy HD535?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HD535?
HD535 is a GASKET.
What parts can replace HD535?
There are 12 known substitutes for HD535: 4058, 107B634, 4004058 and 9 more. Substitute compatibility should be verified for your specific system.
Is HD535 still available?
HD535 is currently cancelled.