PartsTable
Technical Data Sheet
Download PDF

HCS1-5 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HCS1-5: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.6250 INCHES NOMINAL IN, thread_class: 3A A, stud_diameter: 0.2500 INCHES NOMINAL IN, thread_length: 0.2500 INCHES NOMINAL IN, overall_length: 1.0002 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-727-5028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HCS1-5
NSN: 3110-00-727-5028
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 07484 — ACCURATE BUSHING COMPANY, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.6250 INCHES NOMINAL IN
thread_class3A A
stud_diameter0.2500 INCHES NOMINAL IN
thread_length0.2500 INCHES NOMINAL IN
overall_length1.0002 INCHES NOMINAL IN
shield_quantity2
outer_ring_width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
lubrication_materialGREASE
NSN3110-00-727-5028
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HCS1-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
•
SHIELD QUANTITY: 2
•
THREAD LENGTH: 0.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
SHIELD QUANTITY2
THREAD LENGTH0.2500 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH1.0002 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
STUD LENGTH0.6250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HCS1-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HCS1-5?
HCS1-5 is a CAM FOLLOWER,NEEDLE BEARING.
What is the NSN for HCS1-5?
HCS1-5 is cataloged in the U.S. Government catalog under NSN 3110-00-727-5028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HCS1-5