PartsTable
Technical Data Sheet
Download PDF

HCF2264 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HCF2264: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RUBBER POLYISOPRENE NATURAL CLASS NR OR PAPER AND RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.750 INCHES NOMINAL IN, aperture_diameter: 4.781 INCHES NOMINAL IN, bolt_circle_diameter: 5.750 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-692-6142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HCF2264
NSN: 5330-00-692-6142
FSC: 5330 — Packing and Gasket Materials
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialPAPER AND RUBBER POLYISOPRENE NATURAL CLASS NR OR PAPER AND RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.750 INCHES NOMINAL IN
aperture_diameter4.781 INCHES NOMINAL IN
bolt_circle_diameter5.750 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.005 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center2.875 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-692-6142
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HCF2264 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.005 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 2.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 4.781 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 5.750 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.005 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER2.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH6.750 INCHES NOMINAL IN
APERTURE DIAMETER4.781 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER5.750 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
MATERIALPAPER AND RUBBER POLYISOPRENE NATURAL CLASS NR OR PAPER AND RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy HCF2264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HCF2264?
HCF2264 is a GASKET.
What is the NSN for HCF2264?
HCF2264 is cataloged in the U.S. Government catalog under NSN 5330-00-692-6142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HCF2264

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.