PartsTable
Technical Data Sheet
Download PDF

HCF1318 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HCF1318: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1040 NUT, nut_style: SLOTTED, HEXAGON, nut_height: 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-238-9107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HCF1318
NSN: 5310-00-238-9107
FSC: 5310 — Nuts and Washers
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1040 NUT
nut_styleSLOTTED, HEXAGON
nut_height1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats2.500 INCHES NOMINAL IN
nominal_thread_size1.500 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter1.500 INCHES NOMINAL IN
bearing_surface_finish230.0 MICROINCHES
hole_type_and_quantity1 DRILLED
NSN5310-00-238-9107
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HCF1318 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 2.500 INCHES NOMINAL IN
•
BEARING SURFACE FINISH: 230.0 MICROINCHES
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
THREAD PITCH DIAMETERS: +1.4396 TO 1.4522 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.500 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS2.500 INCHES NOMINAL IN
BEARING SURFACE FINISH230.0 MICROINCHES
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION A
THREAD PITCH DIAMETERS+1.4396 TO 1.4522 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.500 INCHES IN
NUT HEIGHT1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER1.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy HCF1318?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HCF1318?
HCF1318 is a NUT,PLAIN,SLOTTED,HEXAGON.
What is the NSN for HCF1318?
HCF1318 is cataloged in the U.S. Government catalog under NSN 5310-00-238-9107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HCF1318