PartsTable
Technical Data Sheet
Download PDF

HC83314-800CE — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HC83314-800CE: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, height: 0.234 INCHES NOMINAL IN, material: STEEL OVERALL, design_type: LOOP ENGAGING, tongue_width: 0.500 INCHES NOMINAL IN, hole_diameter: 0.144 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-968-2550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC83314-800CE
NSN: 5340-00-968-2550
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
height0.234 INCHES NOMINAL IN
materialSTEEL OVERALL
design_typeLOOP ENGAGING
tongue_width0.500 INCHES NOMINAL IN
hole_diameter0.144 INCHES NOMINAL IN
hole_quantity2
overall_width1.093 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
NSN5340-00-968-2550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HC83314-800CE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 2
•
TONGUE WIDTH: 0.500 INCHES NOMINAL IN
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
CATCH STRIKE STYLE: MORTISE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.406 INCHES NOMINAL IN
SURFACE HOLE QUANTITY2
TONGUE WIDTH0.500 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.625 INCHES NOMINAL IN
OVERALL WIDTH1.093 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
HC83314-800Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HC83314-800CE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC83314-800CE?
HC83314-800CE is a CATCH,CLAMPING.
What parts can replace HC83314-800CE?
There is 1 known substitute for HC83314-800CE: HC83314-800. Substitute compatibility should be verified for your specific system.
What is the NSN for HC83314-800CE?
HC83314-800CE is cataloged in the U.S. Government catalog under NSN 5340-00-968-2550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC83314-800CE

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.