PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HC365SSCATCH
HC365SSCATCH ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, catch_width: 1.188 INCHES NOMINAL IN, design_type: CLAW ENGAGING, hole_diameter: 0.130 INCHES NOMINAL IN, overall_height: 0.688 INCHES NOMINAL IN, overall_length: 1.781 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-0328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC365SSCATCH
NSN: 5340-00-240-0328
FSC: 5340
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
catch_width1.188 INCHES NOMINAL IN
design_typeCLAW ENGAGING
hole_diameter0.130 INCHES NOMINAL IN
hole_quantity2
overall_height0.688 INCHES NOMINAL IN
overall_length1.781 INCHES NOMINAL IN
wing_nut_width1.562 INCHES NOMINAL IN
operation_methodTHUMB PIECE
style_designatorSPECIAL
surface_treatmentPASSIVATE OVERALL
engaging_surface_thickness0.062 INCHES NOMINAL IN
NSN5340-00-240-0328
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HC365SSCATCH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.130 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPECIAL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
ENGAGING SURFACE THICKNESS: 0.062 INCHES NOMINAL IN
•
WING NUT WIDTH: 1.562 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.130 INCHES NOMINAL IN
STYLE DESIGNATORSPECIAL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
ENGAGING SURFACE THICKNESS0.062 INCHES NOMINAL IN
WING NUT WIDTH1.562 INCHES NOMINAL IN
HOLE QUANTITY2
OVERALL HEIGHT0.688 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
101103Upgraded Successor
successor cross-reference
successor
B160276-0000Interchangeable
interchangeable cross-reference
interchangeable
810007-000Interchangeable
interchangeable cross-reference
interchangeable
1N5231BInterchangeable
interchangeable cross-reference
interchangeable
2N3468Interchangeable
interchangeable cross-reference
interchangeable
10150143Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HC365SSCATCH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC365SSCATCH?
HC365SSCATCH is a CATCH,CLAMPING.
What parts can replace HC365SSCATCH?
There are 14 known substitutes for HC365SSCATCH: 101103, B160276-0000, 810007-000 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HC365SSCATCH?
HC365SSCATCH is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-0328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC365SSCATCH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026