PartsTable
Technical Data Sheet

HC209ZE/HS205ZE — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HC209ZE/HS205ZE: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL CATCH, hole_diameter: 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN, overall_width: 1.125 INCHES NOMINAL IN, overall_height: 0.562 INCHES NOMINAL IN, overall_length: 3.375 INCHES NOMINAL IN, style_designator: LEVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-413-2045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC209ZE/HS205ZE
NSN: 5340-01-413-2045
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CATCH
hole_diameter0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
hole_quantity2
overall_width1.125 INCHES NOMINAL IN
overall_height0.562 INCHES NOMINAL IN
overall_length3.375 INCHES NOMINAL IN
style_designatorLEVER
surface_treatmentZINC CATCH
engaging_surface_width1.000 INCHES NOMINAL IN
engaging_surface_thickness0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
mounting_facility_quantity2
NSN5340-01-413-2045
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HC209ZE/HS205ZE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
ENGAGING SURFACE WIDTH: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: ZINC CATCH
•
ENGAGING SURFACE THICKNESS: 0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.562 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
ENGAGING SURFACE WIDTH1.000 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
OVERALL LENGTH3.375 INCHES NOMINAL IN
OVERALL WIDTH1.125 INCHES NOMINAL IN
SURFACE TREATMENTZINC CATCH
ENGAGING SURFACE THICKNESS0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
MATERIALSTEEL CATCH
HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
89-36014Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HC209ZE/HS205ZE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC209ZE/HS205ZE?
HC209ZE/HS205ZE is a CATCH,CLAMPING.
What parts can replace HC209ZE/HS205ZE?
There is 1 known substitute for HC209ZE/HS205ZE: 89-36014. Substitute compatibility should be verified for your specific system.
What is the NSN for HC209ZE/HS205ZE?
HC209ZE/HS205ZE is cataloged in the U.S. Government catalog under NSN 5340-01-413-2045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC209ZE/HS205ZE

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.