PartsTable
Technical Data Sheet

HC207ZE/HS205ZE — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HC207ZE/HS205ZE: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, overall_width: 1.234 INCHES NOMINAL IN, overall_length: 3.703 INCHES NOMINAL IN, operation_method: LEVER, style_designator: LEVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-003-6496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC207ZE/HS205ZE
NSN: 5340-01-003-6496
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeLOOP ENGAGING
overall_width1.234 INCHES NOMINAL IN
overall_length3.703 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
features_providedPADLOCK EYE
surface_treatmentZINC OVERALL
catch_strike_styleMORTISE
NSN5340-01-003-6496
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HC207ZE/HS205ZE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: LOOP ENGAGING
•
STYLE DESIGNATOR: LEVER
•
CATCH STRIKE STYLE: MORTISE
•
FEATURES PROVIDED: PADLOCK EYE
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
DESIGN TYPELOOP ENGAGING
STYLE DESIGNATORLEVER
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH3.703 INCHES NOMINAL IN
FEATURES PROVIDEDPADLOCK EYE
OVERALL WIDTH1.234 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
OPERATION METHODLEVER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1767A11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HC207ZE/HS205ZE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC207ZE/HS205ZE?
HC207ZE/HS205ZE is a CATCH,CLAMPING.
What parts can replace HC207ZE/HS205ZE?
There is 1 known substitute for HC207ZE/HS205ZE: 1767A11. Substitute compatibility should be verified for your specific system.
What is the NSN for HC207ZE/HS205ZE?
HC207ZE/HS205ZE is cataloged in the U.S. Government catalog under NSN 5340-01-003-6496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC207ZE/HS205ZE

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.