PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HC200-48
HC200-48 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,AIR BREATHING is a the manufacturer industrial component. Key specifications include material: COTTON AND FIBERGLASS FIRST PLY, hose_weight: 5.000 OUNCES PER LINEAR FOOT OZ, coupling_style: CONNECTOR, OXYGEN HOSE TO REGULATOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) SECOND END, wall_thickness: 0.250 INCHES NOMINAL IN, connection_type: SOFT FIRST END, inside_diameter: 0.750 INCHES NOMINAL FIRST END IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-789-2612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC200-48
NSN: 4720-00-789-2612
FSC: 4720
CAGE: 13560 — HERBERT COOPER CO INC (USA)
SPECIFICATIONS
materialCOTTON AND FIBERGLASS FIRST PLY
hose_weight5.000 OUNCES PER LINEAR FOOT OZ
coupling_styleCONNECTOR, OXYGEN HOSE TO REGULATOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) SECOND END
wall_thickness0.250 INCHES NOMINAL IN
connection_typeSOFT FIRST END
inside_diameter0.750 INCHES NOMINAL FIRST END IN
connection_styleROUND SECOND END
outside_diameter1.094 INCHES MINIMUM AND 1.250 INCHES MAXIMUM BOTH ENDS IN
special_featuresWEAPON SYSTEM ESSENTIAL
style_designatorHELICALLY WOUND CONTINOUS WIRE SUPPORTED
features_providedOZONE RESISTANT AND RESTRAINT CORD
end_overall_length0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM BOTH ENDS IN
NSN4720-00-789-2612
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: HC200-48 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: HELICALLY WOUND CONTINOUS WIRE SUPPORTED
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
HOSE WEIGHT: 5.000 OUNCES PER LINEAR FOOT OZ
•
CONNECTION STYLE: ROUND SECOND END
•
MATERIAL: COPPER ALLOY FIRST END COUPLING
•
CONNECTION TYPE: COUPLING SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
STYLE DESIGNATORHELICALLY WOUND CONTINOUS WIRE SUPPORTED
CRITICALITY CODE JUSTIFICATIONFEAT
OPERATING PRESSURE20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
HOSE WEIGHT5.000 OUNCES PER LINEAR FOOT OZ
CONNECTION STYLEROUND SECOND END
MATERIALCOPPER ALLOY FIRST END COUPLING
CONNECTION TYPECOUPLING SECOND END
COUPLING STYLEOXYGEN HOSE CLAMP FIRST END
FEATURES PROVIDEDOZONE RESISTANT AND RESTRAINT CORD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
REDAR A90105-13Interchangeable
interchangeable cross-reference
interchangeable
WS4127-3-72Interchangeable
interchangeable cross-reference
interchangeable
266AS100-3Interchangeable
interchangeable cross-reference
interchangeable
266AS100Interchangeable
interchangeable cross-reference
interchangeable
A80910-6Interchangeable
interchangeable cross-reference
interchangeable
12111-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HC200-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC200-48?
HC200-48 is a HOSE ASSEMBLY,AIR BREATHING.
What parts can replace HC200-48?
There are 28 known substitutes for HC200-48: REDAR A90105-13, WS4127-3-72, 266AS100-3 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HC200-48?
HC200-48 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-789-2612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC200-48

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026