PartsTable
Technical Data Sheet
Download PDF

HC-83314-842SS — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HC-83314-842SS: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 LEVER, hole_diameter: 0.144 INCHES NOMINAL IN, overall_width: 0.093 INCHES NOMINAL IN, overall_height: 1.641 INCHES NOMINAL IN, overall_length: 1.219 INCHES NOMINAL IN, operation_method: LEVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-247-0570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HC-83314-842SS
NSN: 5340-01-247-0570
FSC: 5340 — Hardware, Commercial
CAGE: 98003 — NIELSEN HARDWARE CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 316 LEVER
hole_diameter0.144 INCHES NOMINAL IN
hole_quantity2
overall_width0.093 INCHES NOMINAL IN
overall_height1.641 INCHES NOMINAL IN
overall_length1.219 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
engaging_surface_width0.062 INCHES NOMINAL IN
end_item_identificationUSED ON NSN6920-01-251-2226 TRN MORT PNEU M32A2
engaging_surface_thickness0.062 INCHES NOMINAL IN
NSN5340-01-247-0570
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HC-83314-842SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ENGAGING SURFACE WIDTH: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
ENGAGING SURFACE THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 316 LEVER
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.641 INCHES NOMINAL IN
ENGAGING SURFACE WIDTH0.062 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
OVERALL LENGTH1.219 INCHES NOMINAL IN
OVERALL WIDTH0.093 INCHES NOMINAL IN
ENGAGING SURFACE THICKNESS0.062 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUSED ON NSN6920-01-251-2226 TRN MORT PNEU M32A2
MATERIALSTEEL COMP 316 LEVER
HOLE QUANTITY2
OPERATION METHODLEVER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
HC-83314-842Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
11578272Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HC-83314-842SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HC-83314-842SS?
HC-83314-842SS is a CATCH,CLAMPING.
What parts can replace HC-83314-842SS?
There are 2 known substitutes for HC-83314-842SS: HC-83314-842, 11578272. Substitute compatibility should be verified for your specific system.
What is the NSN for HC-83314-842SS?
HC-83314-842SS is cataloged in the U.S. Government catalog under NSN 5340-01-247-0570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HC-83314-842SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.