HC-13/U100KHZ — CRYSTAL UNIT SET,QUARTZ

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HC-13/U100KHZ: CRYSTAL UNIT SET,QUARTZ.

The CRYSTAL UNIT SET,QUARTZ is a the manufacturer industrial component. Key specifications include body_width: 0.715 INCHES MINIMUM AND 0.722 INCHES MAXIMUM IN, body_length: 1.516 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, body_thickness: 0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, overall_length: 1.754 INCHES NOMINAL IN, terminal_length: 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5955-00-882-8346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HC-13/U100KHZ

NSN: 5955-00-882-8346
NIINs: 008828346, 010354348
FSC: 5955 — Oscillators and Piezoelectric Crystals
CAGE: 54363 — JAN CRYSTALS DIV OF WHAN BOB & SON ELECTRONICS (USA)

SPECIFICATIONS

body_width	0.715 INCHES MINIMUM AND 0.722 INCHES MAXIMUM IN
body_length	1.516 INCHES NOMINAL IN
overall_width	0.750 INCHES NOMINAL IN
body_thickness	0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
overall_length	1.754 INCHES NOMINAL IN
terminal_length	0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
style_designator	RECTANGULAR BODY, PIN TERMINALS
circuit_resonance	SERIES RESONANCE
overall_thickness	0.340 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
terminal_diameter	0.050 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
drive_level_rating	0.1 MILLIWATTS NOMINAL
mode_of_oscillation	FUNDAMENTAL
NSN	5955-00-882-8346

COMPONENT DIAGRAM

KEY FEATURES

•

FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT: -0.020 TO 0.020

•

TERMINAL DIAMETER: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN

•

TERMINAL LENGTH: 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN

•

MODE OF OSCILLATION: FUNDAMENTAL

•

BODY WIDTH: 0.725 INCHES MAXIMUM IN

•

EQUIVALENT RESISTANCE VALUE IN OHMS: 5000.0 NOMINAL

•

OVERALL THICKNESS: 0.352 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: OVAL BODY, PIN TERMINALS

TECHNICAL CHARACTERISTICS

FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT	-0.020 TO 0.020
TERMINAL DIAMETER	0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
TERMINAL LENGTH	0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
MODE OF OSCILLATION	FUNDAMENTAL
BODY WIDTH	0.725 INCHES MAXIMUM IN
EQUIVALENT RESISTANCE VALUE IN OHMS	5000.0 NOMINAL
OVERALL THICKNESS	0.352 INCHES MAXIMUM IN
STYLE DESIGNATOR	OVAL BODY, PIN TERMINALS
OVERALL LENGTH	1.774 INCHES MAXIMUM IN
OVERALL WIDTH	0.757 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

MIL-C-3098/17Reference document

Same NSN cross-reference

Reference document — Identification reference

0410-0107Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

290-8794-000Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CR-37A/U100.000KHZSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Demilitarization required — mutilation

Ready to buy HC-13/U100KHZ?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HC-13/U100KHZ?

HC-13/U100KHZ is a CRYSTAL UNIT SET,QUARTZ.

What parts can replace HC-13/U100KHZ?

There are 4 known substitutes for HC-13/U100KHZ: MIL-C-3098/17, 0410-0107, 290-8794-000 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for HC-13/U100KHZ?

HC-13/U100KHZ is cataloged in the U.S. Government catalog under NSN 5955-00-882-8346. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HC-13/U100KHZ — CRYSTAL UNIT SET,QUARTZ

Request a Quote — HC-13/U100KHZ