PartsTable
Technical Data Sheet
Download PDF

HB241 U 112 — VALVE,ANGLE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

HB241 U 112: VALVE,ANGLE.

The VALVE,ANGLE is a the manufacturer industrial component. Key specifications include connection_type: THREADED EXTERNAL PIPE FIRST END, connection_style: PLAIN (PIPE) FIRST END, style_designator: ANGLE, thread_direction: RIGHT-HAND FIRST END, operating_pressure: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_thread_size: 0.250 INCHES FIRST END IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-076-6435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HB241 U 112
NSN: 4820-01-076-6435
FSC: 4820 — Valves, Nonpowered
CAGE: 22167 — RICHARDS INDUSTRIES VALVE GROUP BIRKETT/RICHARDS DIV (USA)
SPECIFICATIONS
connection_typeTHREADED EXTERNAL PIPE FIRST END
connection_stylePLAIN (PIPE) FIRST END
style_designatorANGLE
thread_directionRIGHT-HAND FIRST END
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.250 INCHES FIRST END IN
valve_operation_methodMANUAL
end_item_identification2350-01-031-0586
thread_series_designatorNPT FIRST END
NSN4820-01-076-6435
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: HB241 U 112 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: PLAIN (PIPE) FIRST END
•
CONNECTION TYPE: THREADED EXTERNAL PIPE FIRST END
•
STYLE DESIGNATOR: ANGLE
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
NOMINAL THREAD SIZE: 0.250 INCHES FIRST END IN
•
THREAD SERIES DESIGNATOR: NPT FIRST END
TECHNICAL CHARACTERISTICS
CONNECTION STYLEPLAIN (PIPE) FIRST END
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
STYLE DESIGNATORANGLE
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
THREAD DIRECTIONRIGHT-HAND FIRST END
NOMINAL THREAD SIZE0.250 INCHES FIRST END IN
END ITEM IDENTIFICATION2350-01-031-0586
THREAD SERIES DESIGNATORNPT FIRST END
VALVE OPERATION METHODMANUAL
SUBSTITUTES & CROSS-REFERENCES 3
4820010766435Reference document
Same NSN cross-reference
Reference document — Informative reference only
H24-1/4Reference document
Same NSN cross-reference
Reference document — Secondary reference
8449339Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HB241 U 112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HB241 U 112?
HB241 U 112 is a VALVE,ANGLE.
What parts can replace HB241 U 112?
There are 3 known substitutes for HB241 U 112: 4820010766435, H24-1/4, 8449339. Substitute compatibility should be verified for your specific system.
What is the NSN for HB241 U 112?
HB241 U 112 is cataloged in the U.S. Government catalog under NSN 4820-01-076-6435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HB241 U 112