PartsTable
Technical Data Sheet
PartsTable / O-RING / HADB 8200-15
HADB 8200-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-392-0808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HADB 8200-15
NSN: 5331-00-392-0808
FSC: 5331 — O-RING
CAGE: F0037 — AIR LIQUIDE ADVANCED TECHNOLOGIES (FRA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-392-0808
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HADB 8200-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
8200-15Interchangeable
interchangeable cross-reference
interchangeable
723898-001Interchangeable
interchangeable cross-reference
interchangeable
B-1459Interchangeable
interchangeable cross-reference
interchangeable
MIL-001-083Interchangeable
interchangeable cross-reference
interchangeable
4003544Interchangeable
interchangeable cross-reference
interchangeable
W002158Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HADB 8200-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HADB 8200-15?
HADB 8200-15 is a O-RING.
What parts can replace HADB 8200-15?
There are 6 known substitutes for HADB 8200-15: 8200-15, 723898-001, B-1459 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HADB 8200-15?
HADB 8200-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-392-0808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HADB 8200-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026