PartsTable
Technical Data Sheet
Download PDF

HA33190P02 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

HA33190P02: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 5.0000 INCHES NOMINAL IN, special_features: OIL GROOVE, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-464-6672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HA33190P02
NSN: 3120-01-464-6672
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 06TY2 — SHELIA M FARLEY DBA HUNTER ASSOCIATES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length5.0000 INCHES NOMINAL IN
special_featuresOIL GROOVE
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM IN
body_outside_diameter7.8750 INCHES NOMINAL IN
end_item_identificationGFE APL CHG, GENERATOR
part_name_assigned_by_controlling_agencyAXIAL BEARING
NSN3120-01-464-6672
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: HA33190P02 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 7.8750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER7.8750 INCHES NOMINAL IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH5.0000 INCHES NOMINAL IN
BODY INSIDE DIAMETER5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM IN
SPECIAL FEATURESOIL GROOVE
PART NAME ASSIGNED BY CONTROLLING AGENCYAXIAL BEARING
END ITEM IDENTIFICATIONGFE APL CHG, GENERATOR
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
HA-77353Reference document
Same NSN cross-reference
Reference document — Secondary reference
WS09985-BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HA33190P02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HA33190P02?
HA33190P02 is a BEARING,SLEEVE.
What parts can replace HA33190P02?
There are 2 known substitutes for HA33190P02: HA-77353, WS09985-B. Substitute compatibility should be verified for your specific system.
What is the NSN for HA33190P02?
HA33190P02 is cataloged in the U.S. Government catalog under NSN 3120-01-464-6672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HA33190P02