PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H945-LSW-2-RG
H945-LSW-2-RG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include plate_width: 2.875 INCHES NOMINAL IN, plate_length: 4.938 INCHES NOMINAL IN, hole_diameter: 0.199 INCHES NOMINAL IN, inside_length: 4.469 INCHES MINIMUM AND 4.531 INCHES MAXIMUM IN, stock_diameter: 0.312 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-859-2927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H945-LSW-2-RG
NSN: 5340-00-859-2927
FSC: 5340
CAGE: 98003 — NIELSEN HARDWARE CORP (USA)
SPECIFICATIONS
plate_width2.875 INCHES NOMINAL IN
plate_length4.938 INCHES NOMINAL IN
hole_diameter0.199 INCHES NOMINAL IN
inside_length4.469 INCHES MINIMUM AND 4.531 INCHES MAXIMUM IN
stock_diameter0.312 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM IN
style_designatorRECTANGULAR OPEN
surface_treatmentCADMIUM AND ZINC HANDLE
mounting_plate_styleRECTANGULAR
material_document_and_classificationAISI 1010 ASSN STD SINGLE MATERIAL RESPONSE GRIP
NSN5340-00-859-2927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H945-LSW-2-RG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1010 ASSN STD SINGLE MATERIAL RESPONSE GRIP
•
HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
PLATE LENGTH: 4.938 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM AND ZINC GRIP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1010 ASSN STD SINGLE MATERIAL RESPONSE GRIP
HOLE DIAMETER0.199 INCHES NOMINAL IN
PLATE LENGTH4.938 INCHES NOMINAL IN
MOUNTING PLATE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1010 ASSN STD SINGLE MATERIAL RESPONSE HANDLE
SURFACE TREATMENTCADMIUM AND ZINC GRIP
SURFACE TREATMENTPASSIVATE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 302 ASSN STD SINGLE MATERIAL RESPONSE SPRING
SURFACE TREATMENTCADMIUM AND ZINC HANDLE
INSIDE LENGTH4.469 INCHES MINIMUM AND 4.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
9007Upgraded Successor
successor cross-reference
successor
EZ-10Upgraded Successor
successor cross-reference
successor
734-1/2 X 3Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
7031190Interchangeable
interchangeable cross-reference
interchangeable
P106090-07Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H945-LSW-2-RG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H945-LSW-2-RG?
H945-LSW-2-RG is a HANDLE,BAIL.
What parts can replace H945-LSW-2-RG?
There are 13 known substitutes for H945-LSW-2-RG: 9007, EZ-10, 734-1/2 X 3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H945-LSW-2-RG?
H945-LSW-2-RG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-859-2927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H945-LSW-2-RG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026