PartsTable
Technical Data Sheet
Download PDF

H917849-H917810 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

H917849-H917810: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include cup_width: 1.4063 INCHES NOMINAL IN, cone_width: 2.0938 INCHES NOMINAL IN, bore_diameter: 3.2500 INCHES MINIMUM AND 3.2510 INCHES MAXIMUM IN, overall_width: 2.1250 INCHES NOMINAL IN, standout_width: 0.7187 INCHES NOMINAL IN, style_designator: STRAIGHT BORE, NORMAL ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-246-5101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H917849-H917810
NSN: 3110-01-246-5101
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
cup_width1.4063 INCHES NOMINAL IN
cone_width2.0938 INCHES NOMINAL IN
bore_diameter3.2500 INCHES MINIMUM AND 3.2510 INCHES MAXIMUM IN
overall_width2.1250 INCHES NOMINAL IN
standout_width0.7187 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1300 INCHES NOMINAL IN
backface_corner_radius0.1300 INCHES NOMINAL IN
overall_outside_diameter7.1250 INCHES MINIMUM AND 7.1260 INCHES MAXIMUM IN
NSN3110-01-246-5101
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H917849-H917810 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.4063 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 7.1250 INCHES MINIMUM AND 7.1260 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.1300 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1300 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.7187 INCHES NOMINAL IN
•
CONE WIDTH: 2.0938 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.4063 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH2.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER7.1250 INCHES MINIMUM AND 7.1260 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.1300 INCHES NOMINAL IN
CONE CORNER RADIUS0.1300 INCHES NOMINAL IN
STANDOUT WIDTH0.7187 INCHES NOMINAL IN
CONE WIDTH2.0938 INCHES NOMINAL IN
BORE DIAMETER3.2500 INCHES MINIMUM AND 3.2510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
2001506Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A-31459BReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H917849-H917810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H917849-H917810?
H917849-H917810 is a BEARING,ROLLER,TAPERED.
What parts can replace H917849-H917810?
There are 2 known substitutes for H917849-H917810: 2001506, A-31459B. Substitute compatibility should be verified for your specific system.
What is the NSN for H917849-H917810?
H917849-H917810 is cataloged in the U.S. Government catalog under NSN 3110-01-246-5101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H917849-H917810