PartsTable
Technical Data Sheet
Download PDF

H91-113 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H91-113: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, overall_height: 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, overall_length: 1.812 INCHES NOMINAL IN, style_designator: PLAIN, key_chamfer_angle: 60.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-274-4364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H91-113
NSN: 5315-00-274-4364
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
overall_height0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
overall_length1.812 INCHES NOMINAL IN
style_designatorPLAIN
key_chamfer_angle60.0 DEGREES NOMINAL
key_chamfer_length0.0270 INCHES NOMINAL IN
starting_edge_shapeCHAMFERED
NSN5315-00-274-4364
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H91-113 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 60.0 DEGREES NOMINAL
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
KEY CHAMFER LENGTH: 0.0270 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
KEY CHAMFER ANGLE60.0 DEGREES NOMINAL
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
OVERALL LENGTH1.812 INCHES NOMINAL IN
OVERALL WIDTH0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
KEY CHAMFER LENGTH0.0270 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
AC1829Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H91-113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H91-113?
H91-113 is a KEY,MACHINE.
What parts can replace H91-113?
There is 1 known substitute for H91-113: AC1829. Substitute compatibility should be verified for your specific system.
What is the NSN for H91-113?
H91-113 is cataloged in the U.S. Government catalog under NSN 5315-00-274-4364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H91-113