PartsTable
Technical Data Sheet
Download PDF

H9052 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H9052: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM, design_type: THREADED, thread_class: 2B, overall_diameter: 0.877 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN, inside_diameter_length: 0.668 INCHES MINIMUM AND 0.732 INCHES MAXIMUM IN, round_cap_outside_surface_condition: KNURLED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-377-3070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H9052
NSN: 5340-00-377-3070
FSC: 5340 — Hardware, Commercial
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialALUMINUM
design_typeTHREADED
thread_class2B
overall_diameter0.877 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN
inside_diameter_length0.668 INCHES MINIMUM AND 0.732 INCHES MAXIMUM IN
round_cap_outside_surface_conditionKNURLED
thread_size_and_series/type_designator7/8-18 NS OR 7/8-18 UNS NS
NSN5340-00-377-3070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H9052 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.877 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN
•
THREAD CLASS: 2B
•
MATERIAL: ALUMINUM
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/8-18 NS OR 7/8-18 UNS NS
•
INSIDE DIAMETER LENGTH: 0.668 INCHES MINIMUM AND 0.732 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: KNURLED
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.877 INCHES MINIMUM AND 0.883 INCHES MAXIMUM IN
THREAD CLASS2B
MATERIALALUMINUM
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/8-18 NS OR 7/8-18 UNS NS
INSIDE DIAMETER LENGTH0.668 INCHES MINIMUM AND 0.732 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONKNURLED
SUBSTITUTES & CROSS-REFERENCES 2
9052-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340003773070Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy H9052?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H9052?
H9052 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace H9052?
There are 2 known substitutes for H9052: 9052-1, 5340003773070. Substitute compatibility should be verified for your specific system.
What is the NSN for H9052?
H9052 is cataloged in the U.S. Government catalog under NSN 5340-00-377-3070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H9052