PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H8700-1
H8700-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 6.060 INCHES NOMINAL IN, overall_length: 9.630 INCHES NOMINAL IN, bolt_hole_quantity: 14, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-061-3273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H8700-1
NSN: 5330-01-061-3273
FSC: 5330
CAGE: 29236 — M-D PNEUMATICS INC (USA)
SPECIFICATIONS
overall_width6.060 INCHES NOMINAL IN
overall_length9.630 INCHES NOMINAL IN
bolt_hole_quantity14
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-061-3273
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H8700-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 14
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY14
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH6.060 INCHES NOMINAL IN
OVERALL LENGTH9.630 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
125489021Interchangeable
interchangeable cross-reference
interchangeable
125150002Interchangeable
interchangeable cross-reference
interchangeable
8700Interchangeable
interchangeable cross-reference
interchangeable
9222-B-115-3AInterchangeable
interchangeable cross-reference
interchangeable
610304Interchangeable
interchangeable cross-reference
interchangeable
X28524PC7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H8700-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H8700-1?
H8700-1 is a GASKET.
What parts can replace H8700-1?
There are 16 known substitutes for H8700-1: 125489021, 125150002, 8700 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H8700-1?
H8700-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-061-3273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H8700-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026