PartsTable / COMPONENT / H8575
H8575
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 1.000 INCHES NOMINAL IN, maximum_pressure_rating: 200.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.078 INCHES NOMINAL IN, cross-sectional_shape_style: METAL WITH SOFT FILLER, nondefinitive_spec/std_data: 1 TYPE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-199-5786, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H8575
NSN: 5330-00-199-5786 FSC: 5330 CAGE: 12156 — 0MCC INC (USA)
SPECIFICATIONS
outside_diameter 1.000 INCHES NOMINAL IN maximum_pressure_rating 200.0 POUNDS PER SQUARE INCH (PSI) LBS cross-sectional_thickness 0.078 INCHES NOMINAL IN cross-sectional_shape_style METAL WITH SOFT FILLER nondefinitive_spec/std_data 1 TYPE NSN 5330-00-199-5786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H8575
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MAXIMUM PRESSURE RATING: 200.0 POUNDS PER SQUARE INCH (PSI) LBS
• OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
• NONDEFINITIVE SPEC/STD DATA: 1 TYPE
• CROSS-SECTIONAL THICKNESS: 0.078 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING 200.0 POUNDS PER SQUARE INCH (PSI) LBS OUTSIDE DIAMETER 1.000 INCHES NOMINAL IN NONDEFINITIVE SPEC/STD DATA 1 TYPE CROSS-SECTIONAL THICKNESS 0.078 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE METAL WITH SOFT FILLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN115-46 Interchangeable interchangeable cross-reference
interchangeable
15385 Interchangeable interchangeable cross-reference
interchangeable
9N7120 Interchangeable interchangeable cross-reference
interchangeable
799155 Interchangeable interchangeable cross-reference
interchangeable
0950700 Interchangeable interchangeable cross-reference
interchangeable
9433729 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy H8575?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H8575?
H8575 is a GASKET.
What parts can replace H8575?
There are 14 known substitutes for H8575: AN115-46, 15385, 9N7120 and 11 more. Substitute compatibility should be verified for your specific system.
Is H8575 still available?
H8575 is currently cancelled.