PartsTable
Technical Data Sheet

H84B&1-2 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H84B&1-2: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: CHAMFERED, pin_overall_length: 1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN, pin_overall_diameter: 0.5000 INCHES NOMINAL IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN, material_document_and_classification: QQ-S-779,GR 3 FED SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-054-4161, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H84B&1-2
NSN: 5315-00-054-4161
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 95208 — PARKER-HANNIFIN CORPORATION DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W310 OVERALL
first_end_styleCHAMFERED
pin_overall_length1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
pin_overall_diameter0.5000 INCHES NOMINAL IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationQQ-S-779,GR 3 FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-054-4161
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H84B&1-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-779,GR 3 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.5000 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W310 OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-779,GR 3 FED SPEC ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.5000 INCHES NOMINAL IN
PIN OVERALL LENGTH1.488 INCHES MINIMUM AND 1.512 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W310 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
544161Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H84B&1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H84B&1-2?
H84B&1-2 is a PIN,STRAIGHT,HEADLESS.
What parts can replace H84B&1-2?
There is 1 known substitute for H84B&1-2: 544161. Substitute compatibility should be verified for your specific system.
What is the NSN for H84B&1-2?
H84B&1-2 is cataloged in the U.S. Government catalog under NSN 5315-00-054-4161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H84B&1-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.