PartsTable
Technical Data Sheet
Download PDF

H778-1407-F1 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

H778-1407-F1: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, design_type: TUBULAR, outside_diameter: 0.620 INCHES MINIMUM AND 1.680 INCHES MAXIMUM IN, thread_provision: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED, end_item_identification: USS VIRGINIA. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-519-8275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H778-1407-F1
NSN: 4730-01-519-8275
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
design_typeTUBULAR
outside_diameter0.620 INCHES MINIMUM AND 1.680 INCHES MAXIMUM IN
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
end_item_identificationUSS VIRGINIA
NSN4730-01-519-8275
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: H778-1407-F1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD PROVISION: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED
•
DESIGN TYPE: TUBULAR
•
OUTSIDE DIAMETER: 0.620 INCHES MINIMUM AND 1.680 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
THREAD PROVISIONUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
DESIGN TYPETUBULAR
OUTSIDE DIAMETER0.620 INCHES MINIMUM AND 1.680 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONUSS VIRGINIA
MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 2
2633-561-01 PC 292Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
342-7068270-F1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H778-1407-F1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H778-1407-F1?
H778-1407-F1 is a RESTRICTOR,FLUID FLOW.
What parts can replace H778-1407-F1?
There are 2 known substitutes for H778-1407-F1: 2633-561-01 PC 292, 342-7068270-F1. Substitute compatibility should be verified for your specific system.
What is the NSN for H778-1407-F1?
H778-1407-F1 is cataloged in the U.S. Government catalog under NSN 4730-01-519-8275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H778-1407-F1