PartsTable
Technical Data Sheet
Download PDF

H75SWB — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H75SWB: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.281 INCHES NOMINAL IN, overall_height: 1.844 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), special_features: 0.203 IN. SLOT; ENDS BENT OUTWARD IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-054-5247, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H75SWB
NSN: 5340-00-054-5247
NIINs: 000545247, 012156133
FSC: 5340 — Hardware, Commercial
CAGE: 03743 — EGS ELECTRICAL GROUP APPLETON DIV (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.281 INCHES NOMINAL IN
overall_height1.844 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
special_features0.203 IN. SLOT; ENDS BENT OUTWARD IN
style_designatorCLEVIS
surface_treatmentCADMIUM OVERALL
pipe_accommodation_diameter1.000 INCHES NOMINAL IN
supported_item_and_quantity1 CONDUIT
distance_from_loop_center_to_end0.906 INCHES NOMINAL IN
NSN5340-00-054-5247
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H75SWB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: THREADED HOLE(S)
•
DISTANCE FROM LOOP CENTER TO END: 0.906 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.844 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
DISTANCE FROM LOOP CENTER TO END0.906 INCHES NOMINAL IN
SPECIAL FEATURES0.203 IN. SLOT; ENDS BENT OUTWARD IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A42212-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H75SWB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H75SWB?
H75SWB is a CLIP,SPRING TENSION.
What parts can replace H75SWB?
There is 1 known substitute for H75SWB: A42212-2. Substitute compatibility should be verified for your specific system.
What is the NSN for H75SWB?
H75SWB is cataloged in the U.S. Government catalog under NSN 5340-00-054-5247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H75SWB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.