PartsTable
Technical Data Sheet
Download PDF

H73707-01-1-9 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H73707-01-1-9: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: ONE-PIECE, end_item_identification: 29.750 INCH TYPE MX9 NIMITZ CLASS MX9 SEAL,CVN 73 USS GEORGE WASHINGTON IN, material_document_and_classification: MIL-R-6855,CL2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: INFLATABLE SEAL 44700. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-474-1087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H73707-01-1-9
NSN: 5330-01-474-1087
FSC: 5330 — Packing and Gasket Materials
CAGE: 0EYA6 — DEFENSE MARITIME SOLUTIONS, INC. (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionONE-PIECE
end_item_identification29.750 INCH TYPE MX9 NIMITZ CLASS MX9 SEAL,CVN 73 USS GEORGE WASHINGTON IN
material_document_and_classificationMIL-R-6855,CL2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyINFLATABLE SEAL 44700
NSN5330-01-474-1087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H73707-01-1-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYINFLATABLE SEAL 44700
END ITEM IDENTIFICATION29.750 INCH TYPE MX9 NIMITZ CLASS MX9 SEAL,CVN 73 USS GEORGE WASHINGTON IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES 2
US73707-01Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
US7307-01 ITEM 1-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H73707-01-1-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H73707-01-1-9?
H73707-01-1-9 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace H73707-01-1-9?
There are 2 known substitutes for H73707-01-1-9: US73707-01, US7307-01 ITEM 1-9. Substitute compatibility should be verified for your specific system.
What is the NSN for H73707-01-1-9?
H73707-01-1-9 is cataloged in the U.S. Government catalog under NSN 5330-01-474-1087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H73707-01-1-9