H72782 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

H72782: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 16.000 POUNDS MINIMUM AND 19.000 POUNDS MAXIMUM LBS, inside_diameter: 0.359 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN, style_designator: TAPERED, spring_free_length: 1.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-725-1912, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

H72782

NSN: 5360-00-725-1912
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	16.000 POUNDS MINIMUM AND 19.000 POUNDS MAXIMUM LBS
coil_quantity	7
inside_diameter	0.359 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
style_designator	TAPERED
spring_free_length	1.187 INCHES NOMINAL IN
spring_solid_length	0.497 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
end_item_identification	2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
material_hardness_rating	42.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM
spring_length_under_load	0.750 INCHES NOMINAL IN
NSN	5360-00-725-1912

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN

•

MATERIAL HARDNESS RATING: 42.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM

•

LOAD RATING: 16.000 POUNDS MINIMUM AND 19.000 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.497 INCHES NOMINAL IN

•

STYLE DESIGNATOR: TAPERED

•

SPRING FREE LENGTH: 1.187 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.359 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.750 INCHES NOMINAL IN
MATERIAL HARDNESS RATING	42.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM
LOAD RATING	16.000 POUNDS MINIMUM AND 19.000 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.497 INCHES NOMINAL IN
STYLE DESIGNATOR	TAPERED
SPRING FREE LENGTH	1.187 INCHES NOMINAL IN
INSIDE DIAMETER	0.359 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	0.750 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	0.750 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

72782Reference document

Same NSN cross-reference

Reference document — Secondary reference

222312Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2039282Reference document

Same NSN cross-reference

Reference document — Secondary reference

2222312Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy H72782?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is H72782?

H72782 is a SPRING,HELICAL,COMPRESSION.

What parts can replace H72782?

There are 4 known substitutes for H72782: 72782, 222312, 2039282 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for H72782?

H72782 is cataloged in the U.S. Government catalog under NSN 5360-00-725-1912. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

H72782 — SPRING,HELICAL,COMPRESSION

Request a Quote — H72782