H6P — CLAMP,LOOP
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
H6P: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 7.2 MILLIMETERS NOMINAL MM, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 10.0 MILLIMETERS NOMINAL MM, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 1.2 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-338-7002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H6P
NSN: 5340-01-338-7002 FSC: 5340 — Hardware, CommercialCAGE: D8527 — HELLERMANN TYTON GMBH (DEU)
SPECIFICATIONS
diameter 7.2 MILLIMETERS NOMINAL MM material PLASTIC POLYAMIDE NYLON OVERALL overall_width 10.0 MILLIMETERS NOMINAL MM style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 1.2 MILLIMETERS NOMINAL MM loop_inside_diameter 11.0 MILLIMETERS NOMINAL MM distance_from_loop_center_to_tongue_end 19.5 MILLIMETERS NOMINAL MM center_to_center_distance_between_loop_and_mounting_hole 13.0 MILLIMETERS NOMINAL MM NSN 5340-01-338-7002
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H6P
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 7.2 MILLIMETERS NOMINAL MM
• MATERIAL THICKNESS: 1.2 MILLIMETERS NOMINAL MM
• DISTANCE FROM LOOP CENTER TO TONGUE END: 19.5 MILLIMETERS NOMINAL MM
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 13.0 MILLIMETERS NOMINAL MM
• MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR SINGLE LOOP DIAMETER 7.2 MILLIMETERS NOMINAL MM OVERALL WIDTH 10.0 MILLIMETERS NOMINAL MM MATERIAL THICKNESS 1.2 MILLIMETERS NOMINAL MM DISTANCE FROM LOOP CENTER TO TONGUE END 19.5 MILLIMETERS NOMINAL MM TONGUE HOLE TYPE ROUND, UNTHREADED CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 13.0 MILLIMETERS NOMINAL MM MATERIAL PLASTIC POLYAMIDE NYLON OVERALL LOOP INSIDE DIAMETER 11.0 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
SUBSTITUTES & CROSS-REFERENCES 1
5495469-006 Reference document Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM) No demilitarization required
Ready to buy H6P?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H6P?
H6P is a CLAMP,LOOP.
What parts can replace H6P?
There is 1 known substitute for H6P: 5495469-006. Substitute compatibility should be verified for your specific system.
What is the NSN for H6P?
H6P is cataloged in the U.S. Government catalog under NSN 5340-01-338-7002. This indicates validated use in U.S. government and defense supply chains.