H696-1602-35 — COUPLING,SHAFT,RIGID

✓ Government record, cited

— · GATE VALVE

PRODUCT OVERVIEW

H696-1602-35: COUPLING,SHAFT,RIGID.

The COUPLING,SHAFT,RIGID is a the manufacturer industrial component. Key specifications include flange_diameter: 15.465 INCHES NOMINAL IN, special_features: TWO GROOVES 160 DEGREES APART ON OUTER RIDGE, R=.38, style_designator: PLAIN FLANGED, under_flange_height: 1.080 INCHES NOMINAL IN, body_inside_diameter: 11.194 INCHES NOMINAL IN, body_outside_diameter: 3.206 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-484-2984, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

H696-1602-35

NSN: 4820-01-484-2984
NIINs: 014842984, 016473934
FSC: 4820 — Valves, Nonpowered
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

flange_diameter	15.465 INCHES NOMINAL IN
special_features	TWO GROOVES 160 DEGREES APART ON OUTER RIDGE, R=.38
style_designator	PLAIN FLANGED
under_flange_height	1.080 INCHES NOMINAL IN
body_inside_diameter	11.194 INCHES NOMINAL IN
body_outside_diameter	3.206 INCHES NOMINAL IN
seating_surface_shape	FLAT
end_item_identification	E/I VALVE, BALL 1; NSSN CLASS SUBMARINE VALVE HULL AND BACKUP HOVERING SYSTEM; W/S LOS ANGELES CLASS SSN (688)
seal_accommodation_type	GROOVED
flange_seat_to_disk_end_height	1.600 INCHES NOMINAL IN
NSN	4820-01-484-2984

COMPONENT DIAGRAM

KEY FEATURES

•

FLANGE SEAT TO DISK END HEIGHT: 1.600 INCHES NOMINAL IN

•

FLANGE DIAMETER: 15.465 INCHES NOMINAL IN

•

BODY OUTSIDE DIAMETER: 3.206 INCHES NOMINAL IN

•

SEAL ACCOMMODATION TYPE: GROOVED

•

STYLE DESIGNATOR: PLAIN FLANGED

•

BODY INSIDE DIAMETER: 11.194 INCHES NOMINAL IN

•

UNDER FLANGE HEIGHT: 1.080 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FLANGE SEAT TO DISK END HEIGHT	1.600 INCHES NOMINAL IN
FLANGE DIAMETER	15.465 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER	3.206 INCHES NOMINAL IN
SEAL ACCOMMODATION TYPE	GROOVED
STYLE DESIGNATOR	PLAIN FLANGED
BODY INSIDE DIAMETER	11.194 INCHES NOMINAL IN
SPECIAL FEATURES	TWO GROOVES 160 DEGREES APART ON OUTER RIDGE, R=.38
UNDER FLANGE HEIGHT	1.080 INCHES NOMINAL IN
END ITEM IDENTIFICATION	E/I VALVE, BALL 1; NSSN CLASS SUBMARINE VALVE HULL AND BACKUP HOVERING SYSTEM; W/S LOS ANGELES CLASS SSN (688)
SEATING SURFACE SHAPE	FLAT

SUBSTITUTES & CROSS-REFERENCES 1

7067896Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy H696-1602-35?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is H696-1602-35?

H696-1602-35 is a COUPLING,SHAFT,RIGID.

What parts can replace H696-1602-35?

There is 1 known substitute for H696-1602-35: 7067896. Substitute compatibility should be verified for your specific system.

What is the NSN for H696-1602-35?

H696-1602-35 is cataloged in the U.S. Government catalog under NSN 4820-01-484-2984. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

H696-1602-35 — COUPLING,SHAFT,RIGID

Request a Quote — H696-1602-35