The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flange_style: ROUND W / BOLT HOLES FIRST END, connection_type: RAISED FACE FLANGE FIRST END, inside_diameter: 1.375 INCHES NOMINAL IN, connection_style: RAISED SWIVEL FIRST END, flange_thickness: 0.440 INCHES NOMINAL FIRST END IN, outside_diameter: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-511-9130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H655-1509-F134
NSN:4720-01-511-9130 FSC:4720 — Hose and Flexible Tubing CAGE:96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
flange_style
ROUND W / BOLT HOLES FIRST END
connection_type
RAISED FACE FLANGE FIRST END
inside_diameter
1.375 INCHES NOMINAL IN
connection_style
RAISED SWIVEL FIRST END
flange_thickness
0.440 INCHES NOMINAL FIRST END IN
outside_diameter
1.750 INCHES NOMINAL IN
special_features
WEAPON SYSTEM ESSENTIAL; ENDS ARE 150 LB FLANGE, USE GASKET TO SEAL, HAS 90 DEGREE ELBOW; HOSE LINER BUTEDIENE RUBBER; LENGTH TO BE DETERMINED DURING INSTALLATION LBS
bolt_hole_diameter
0.620 INCHES NOMINAL FIRST END IN
bolt_hole_quantity
4 FIRST END
operating_pressure
150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
raised_face_height
0.250 INCHES NOMINAL FIRST END IN
burst_test_pressure
600.0 POUNDS PER SQUARE INCH LBS
NSN
4720-01-511-9130
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 0.000 INCHES NOMINAL OVERALL IN
•
FLANGE THICKNESS: 0.440 INCHES NOMINAL FIRST END IN
•
MINIMUM INSIDE BENDING RADIUS: 7.375 INCHES IN
•
CONNECTION STYLE: RAISED SWIVEL FIRST END
•
FLANGE OUTSIDE DIAMETER: 4.250 INCHES NOMINAL FIRST END IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER AND 1ST LAYER BRAIDED FIBER AND 2ND LAYER BRAIDED FIBER
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
0.000 INCHES NOMINAL OVERALL IN
FLANGE THICKNESS
0.440 INCHES NOMINAL FIRST END IN
MINIMUM INSIDE BENDING RADIUS
7.375 INCHES IN
CONNECTION STYLE
RAISED SWIVEL FIRST END
FLANGE OUTSIDE DIAMETER
4.250 INCHES NOMINAL FIRST END IN
END CONNECTION DESIGN
STRAIGHT FIRST END
CRITICALITY CODE JUSTIFICATION
FEAT
LAYER COMPOSITION AND LOCATION
OUTER LAYER MOLDED RUBBER AND 1ST LAYER BRAIDED FIBER AND 2ND LAYER BRAIDED FIBER
CONNECTION TYPE
RAISED FACE FLANGE FIRST END
BOLT HOLE DIAMETER
0.620 INCHES NOMINAL FIRST END IN
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H655-1509-F134?
H655-1509-F134 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace H655-1509-F134?
There are 3 known substitutes for H655-1509-F134: 2633-225-01 ASSY 168, 533-7016025-F134, 6640963. Substitute compatibility should be verified for your specific system.
What is the NSN for H655-1509-F134?
H655-1509-F134 is cataloged in the U.S. Government catalog under NSN 4720-01-511-9130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.