PartsTable
Technical Data Sheet
Download PDF

H64612 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H64612: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.380 INCHES NOMINAL IN, material: STEEL OVERALL, loop_height: 0.620 INCHES NOMINAL IN, mounting_method: PROJECTING TAB, surface_treatment: ZINC OR CADMIUM OVERALL, loop_opening_width: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-239-8179, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H64612
NSN: 5340-01-239-8179
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
width0.380 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_height0.620 INCHES NOMINAL IN
mounting_methodPROJECTING TAB
surface_treatmentZINC OR CADMIUM OVERALL
loop_opening_width0.030 INCHES NOMINAL IN
material_thickness0.017 INCHES NOMINAL IN
NSN5340-01-239-8179
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H64612 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: PROJECTING TAB
•
MATERIAL THICKNESS: 0.017 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.030 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OR CADMIUM OVERALL
•
WIDTH: 0.380 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOOP HEIGHT: 0.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING METHODPROJECTING TAB
MATERIAL THICKNESS0.017 INCHES NOMINAL IN
LOOP OPENING WIDTH0.030 INCHES NOMINAL IN
SURFACE TREATMENTZINC OR CADMIUM OVERALL
WIDTH0.380 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP HEIGHT0.620 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy H64612?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H64612?
H64612 is a CLIP,SPRING TENSION.
What is the NSN for H64612?
H64612 is cataloged in the U.S. Government catalog under NSN 5340-01-239-8179. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H64612

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.