PartsTable
Technical Data Sheet
H625-0308-57 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC, POLYETHYLENE (PP), overall_width: 1.880 INCHES NOMINAL IN, overall_height: 0.875 INCHES NOMINAL IN, overall_length: 3.880 INCHES NOMINAL IN, end_item_identification: USED ON LOS ANGELES CLASS SSN, material_document_and_classification: MIL-P-21922/FORM-A/TY-I/CL-M/GR-1 MIL SPEC ALL MATERIAL RESPONSES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-497-6710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H625-0308-57
NSN: 5340-01-497-6710
FSC: 5340
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
overall_width1.880 INCHES NOMINAL IN
overall_height0.875 INCHES NOMINAL IN
overall_length3.880 INCHES NOMINAL IN
end_item_identificationUSED ON LOS ANGELES CLASS SSN
material_document_and_classificationMIL-P-21922/FORM-A/TY-I/CL-M/GR-1 MIL SPEC ALL MATERIAL RESPONSES
part_name_assigned_by_controlling_agencyHOLDER, MAGNET
NSN5340-01-497-6710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H625-0308-57 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: PLASTIC, POLYETHYLENE (PP)
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-21922/FORM-A/TY-I/CL-M/GR-1 MIL SPEC ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.880 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
PART NAME ASSIGNED BY CONTROLLING AGENCYHOLDER, MAGNET
OVERALL HEIGHT0.875 INCHES NOMINAL IN
OVERALL WIDTH1.880 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-21922/FORM-A/TY-I/CL-M/GR-1 MIL SPEC ALL MATERIAL RESPONSES
END ITEM IDENTIFICATIONUSED ON LOS ANGELES CLASS SSN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
566-7067170-62Interchangeable
interchangeable cross-reference
interchangeable
H625-0308-62Interchangeable
interchangeable cross-reference
interchangeable
7067170Interchangeable
interchangeable cross-reference
interchangeable
H625-0308-211Interchangeable
interchangeable cross-reference
interchangeable
566-7067170-211Interchangeable
interchangeable cross-reference
interchangeable
H625-0308-212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H625-0308-57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H625-0308-57?
H625-0308-57 is a BRACKET,MOUNTING.
What parts can replace H625-0308-57?
There are 21 known substitutes for H625-0308-57: 566-7067170-62, H625-0308-62, 7067170 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H625-0308-57?
H625-0308-57 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-497-6710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H625-0308-57