H623-0503-43 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

H623-0503-43: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.750 INCHES NOMINAL IN, diameter: 3.369 INCHES MINIMUM AND 3.371 INCHES MAXIMUM IN, material: NICKEL ALLOY 502 OVERALL, head_style: ROOF, chamfer_length: 0.060 INCHES NOMINAL IN, special_features: HEAD CENTER DRILLED .750-10UNC-2B X 1.38 (MIN) FULL THD (LIFTING HOLE). This part is cataloged in the U.S.

Government catalog under NSN 5315-01-491-9470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

H623-0503-43

NSN: 5315-01-491-9470
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

height	0.750 INCHES NOMINAL IN
diameter	3.369 INCHES MINIMUM AND 3.371 INCHES MAXIMUM IN
material	NICKEL ALLOY 502 OVERALL
head_style	ROOF
chamfer_length	0.060 INCHES NOMINAL IN
special_features	HEAD CENTER DRILLED .750-10UNC-2B X 1.38 (MIN) FULL THD (LIFTING HOLE)
style_designator	STRAIGHT
pin_chamfer_angle	45.0 DEGREES NOMINAL
pin_head_diameter	5.190 INCHES NOMINAL IN
under_head_length	11.180 INCHES NOMINAL IN
end_item_identification	STERN DIVE GEAR STARBOARD OPERATING GEAR ASSEMBLY; LOS ANGELES CLASS SSN(688)
material_document_and_classification	QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5315-01-491-9470

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.060 INCHES NOMINAL IN

•

UNDER HEAD LENGTH: 11.180 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 5.190 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 3.369 INCHES MINIMUM AND 3.371 INCHES MAXIMUM IN

•

HEAD STYLE: ROOF

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.060 INCHES NOMINAL IN
UNDER HEAD LENGTH	11.180 INCHES NOMINAL IN
PIN CHAMFER ANGLE	45.0 DEGREES NOMINAL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	5.190 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	3.369 INCHES MINIMUM AND 3.371 INCHES MAXIMUM IN
HEAD STYLE	ROOF
HEIGHT	0.750 INCHES NOMINAL IN
SPECIAL FEATURES	HEAD CENTER DRILLED .750-10UNC-2B X 1.38 (MIN) FULL THD (LIFTING HOLE)

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy H623-0503-43?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is H623-0503-43?

H623-0503-43 is a PIN,STRAIGHT,HEADED.

What is the NSN for H623-0503-43?

H623-0503-43 is cataloged in the U.S. Government catalog under NSN 5315-01-491-9470. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

H623-0503-43 — PIN,STRAIGHT,HEADED

Request a Quote — H623-0503-43