PartsTable
Technical Data Sheet
Download PDF

H615P001 ITEM 9 — VALVE,CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

H615P001 ITEM 9: VALVE,CHECK.

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include material: STEEL BODY, thread_direction: RIGHT-HAND ALL ENDS, nominal_thread_size: 1.312 INCHES ALL ENDS IN, valve_operation_method: AUTOMATIC, opening_pressure_setting: 5.0 POUNDS PER SQUARE INCH LBS, thread_quantity_per_inch: 12 ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-370-5961, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H615P001 ITEM 9
NSN: 4820-01-370-5961
FSC: 4820 — Valves, Nonpowered
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialSTEEL BODY
thread_directionRIGHT-HAND ALL ENDS
nominal_thread_size1.312 INCHES ALL ENDS IN
valve_operation_methodAUTOMATIC
opening_pressure_setting5.0 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch12 ALL ENDS
NSN4820-01-370-5961
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: H615P001 ITEM 9 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
•
NOMINAL THREAD SIZE: 1.312 INCHES ALL ENDS IN
•
THREAD QUANTITY PER INCH: 12 ALL ENDS
•
MATERIAL: STEEL BODY
•
OPENING PRESSURE SETTING: 5.0 POUNDS PER SQUARE INCH LBS
•
VALVE OPERATION METHOD: AUTOMATIC
TECHNICAL CHARACTERISTICS
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE1.312 INCHES ALL ENDS IN
THREAD QUANTITY PER INCH12 ALL ENDS
MATERIALSTEEL BODY
OPENING PRESSURE SETTING5.0 POUNDS PER SQUARE INCH LBS
VALVE OPERATION METHODAUTOMATIC
SUBSTITUTES & CROSS-REFERENCES 1
13384674Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H615P001 ITEM 9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H615P001 ITEM 9?
H615P001 ITEM 9 is a VALVE,CHECK.
What parts can replace H615P001 ITEM 9?
There is 1 known substitute for H615P001 ITEM 9: 13384674. Substitute compatibility should be verified for your specific system.
What is the NSN for H615P001 ITEM 9?
H615P001 ITEM 9 is cataloged in the U.S. Government catalog under NSN 4820-01-370-5961. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H615P001 ITEM 9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.