PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H615B001 ITEM 353
H615B001 ITEM 353 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, overall_width: 5.000 INCHES NOMINAL IN, overall_length: 10.000 INCHES NOMINAL IN, elongation_percentage: 125 MAXIMUM, cross-sectional_thickness: 0.187 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-369-9530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H615B001 ITEM 353
NSN: 5330-01-369-9530
FSC: 5330
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
overall_width5.000 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
cross-sectional_thickness0.187 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-83248,TYPE 3,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-369-9530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H615B001 ITEM 353 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.187 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248,TYPE 3,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH10.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.187 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248,TYPE 3,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH5.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
PD9300-59Interchangeable
interchangeable cross-reference
interchangeable
105574Interchangeable
interchangeable cross-reference
interchangeable
5305004630429Interchangeable
interchangeable cross-reference
interchangeable
3017050Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H615B001 ITEM 353?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H615B001 ITEM 353?
H615B001 ITEM 353 is a GASKET.
What parts can replace H615B001 ITEM 353?
There are 4 known substitutes for H615B001 ITEM 353: PD9300-59, 105574, 5305004630429 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H615B001 ITEM 353?
H615B001 ITEM 353 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-369-9530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H615B001 ITEM 353

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026