PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H605S050A150
H605S050A150 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH ASSEMBLY is a the manufacturer industrial component. Key specifications include width: 1.380 INCHES NOMINAL IN, length: 1.380 INCHES NOMINAL IN, special_features: MATL:BUTTON ALUM. ALLOY,BODY CRES STEEL;SURFACE TREAT.

BUTTON ANODIZED, style_designator: BUTTON ACTUATOR, bolt_offset_distance: 0.150 INCHES NOMINAL IN, lever_offset_distance: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-852-6791, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H605S050A150
NSN: 5340-00-852-6791
FSC: 5340
CAGE: 83014 — HARTWELL CORPORATION (USA)
SPECIFICATIONS
width1.380 INCHES NOMINAL IN
length1.380 INCHES NOMINAL IN
special_featuresMATL:BUTTON ALUM. ALLOY,BODY CRES STEEL;SURFACE TREAT. BUTTON ANODIZED
style_designatorBUTTON ACTUATOR
bolt_offset_distance0.150 INCHES NOMINAL IN
lever_offset_distance0.050 INCHES NOMINAL IN
mounting_hole_diameter0.128 INCHES NOMINAL IN
end_item_identificationUH-1N HELICOPTER
center_to_center_distance_between_mounting_holes_along_width1.060 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.060 INCHES NOMINAL IN
NSN5340-00-852-6791
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H605S050A150 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LEVER OFFSET DISTANCE: 0.050 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTTON ACTUATOR
•
LENGTH: 1.380 INCHES NOMINAL IN
•
WIDTH: 1.380 INCHES NOMINAL IN
•
BOLT OFFSET DISTANCE: 0.150 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.060 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LEVER OFFSET DISTANCE0.050 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.060 INCHES NOMINAL IN
STYLE DESIGNATORBUTTON ACTUATOR
LENGTH1.380 INCHES NOMINAL IN
WIDTH1.380 INCHES NOMINAL IN
BOLT OFFSET DISTANCE0.150 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.060 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.128 INCHES NOMINAL IN
SPECIAL FEATURESMATL:BUTTON ALUM. ALLOY,BODY CRES STEEL;SURFACE TREAT. BUTTON ANODIZED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
HK5L6050S-050A150Interchangeable
interchangeable cross-reference
interchangeable
H605S050A150Interchangeable
interchangeable cross-reference
interchangeable
90-030Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H605S050A150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H605S050A150?
H605S050A150 is a LATCH ASSEMBLY.
What parts can replace H605S050A150?
There are 3 known substitutes for H605S050A150: HK5L6050S-050A150, H605S050A150, 90-030. Substitute compatibility should be verified for your specific system.
Is H605S050A150 still available?
H605S050A150 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H605S050A150

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026