PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H601K2405
H601K2405 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include design_type: CLAW ENGAGING, special_features: BUTTON OD 1.000 IN.,ID 0.810 IN.; 4 MOUNTING HOLES C TO C DISTANCE 1.060 IN.; OPEN POSITION HEIGHT 1.020 IN.MAX IN, end_item_identification: AMRAAM LAU 128A/A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-372-4741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H601K2405
NSN: 5340-01-372-4741
FSC: 5340
CAGE: 83014 — HARTWELL CORPORATION (USA)
SPECIFICATIONS
design_typeCLAW ENGAGING
special_featuresBUTTON OD 1.000 IN.,ID 0.810 IN.; 4 MOUNTING HOLES C TO C DISTANCE 1.060 IN.; OPEN POSITION HEIGHT 1.020 IN.MAX IN
end_item_identificationAMRAAM LAU 128A/A A
NSN5340-01-372-4741
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H601K2405 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: CLAW ENGAGING
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAMRAAM LAU 128A/A A
DESIGN TYPECLAW ENGAGING
SPECIAL FEATURESBUTTON OD 1.000 IN.,ID 0.810 IN.; 4 MOUNTING HOLES C TO C DISTANCE 1.060 IN.; OPEN POSITION HEIGHT 1.020 IN.MAX IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
13124Interchangeable
interchangeable cross-reference
interchangeable
654347-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H601K2405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H601K2405?
H601K2405 is a CATCH,CLAMPING.
What parts can replace H601K2405?
There are 2 known substitutes for H601K2405: 13124, 654347-1. Substitute compatibility should be verified for your specific system.
What is the NSN for H601K2405?
H601K2405 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-372-4741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H601K2405

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026