PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H60010

H60010 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, design_type: SOLID, end_diameter: 0.6150 INCHES NOMINAL IN, bore_diameter: 1.0550 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-356-1421, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H60010
NSN: 5340-00-356-1421
FSC: 5340
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
design_typeSOLID
end_diameter0.6150 INCHES NOMINAL IN
bore_diameter1.0550 INCHES NOMINAL IN
overall_height0.7820 INCHES NOMINAL IN
style_designatorSEAT
bore_taper_in_deg15.0
first_step_length0.1380 INCHES NOMINAL IN
seat_angle_in_deg45.0
surface_treatmentCADMIUM CASE
NSN5340-00-356-1421
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H60010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND STEP DIAMETER: 1.6220 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SEAT
•
DESIGN TYPE: SOLID
•
SECOND END DIAMETER: 1.3650 INCHES NOMINAL IN
•
BORE TAPER IN DEG: 15.0
•
COUNTERSINK DIAMETER: 1.1550 INCHES NOMINAL IN
•
END DIAMETER: 0.6150 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.5200 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND STEP DIAMETER1.6220 INCHES NOMINAL IN
STYLE DESIGNATORSEAT
DESIGN TYPESOLID
SECOND END DIAMETER1.3650 INCHES NOMINAL IN
BORE TAPER IN DEG15.0
COUNTERSINK DIAMETER1.1550 INCHES NOMINAL IN
END DIAMETER0.6150 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.5200 INCHES NOMINAL IN
COUNTERBORE LENGTH0.1750 INCHES NOMINAL IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
600-10Upgraded SuccessorGOVERNMENT REGISTRY
successor cross-reference
successor
7027220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
533.1562InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GGG-K-471InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
600InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
855426InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy H60010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H60010?
H60010 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace H60010?
There are 18 known substitutes for H60010: 600-10, 7027220, 533.1562 and 15 more. Substitute compatibility should be verified for your specific system.
Is H60010 still available?
H60010 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H60010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026