H5P — CLAMP,LOOP
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
H5P: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 4.2 MILLIMETERS NOMINAL MM, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 10.0 MILLIMETERS NOMINAL MM, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 1.2 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-338-7001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H5P
NSN: 5340-01-338-7001 FSC: 5340 — Hardware, CommercialCAGE: D8527 — HELLERMANN TYTON GMBH (DEU)
SPECIFICATIONS
diameter 4.2 MILLIMETERS NOMINAL MM material PLASTIC POLYAMIDE NYLON OVERALL overall_width 10.0 MILLIMETERS NOMINAL MM style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 1.2 MILLIMETERS NOMINAL MM loop_inside_diameter 9.5 MILLIMETERS NOMINAL MM distance_from_loop_center_to_tongue_end 16.5 MILLIMETERS NOMINAL MM center_to_center_distance_between_loop_and_mounting_hole 11.0 MILLIMETERS NOMINAL MM NSN 5340-01-338-7001
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H5P
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 4.2 MILLIMETERS NOMINAL MM
• MATERIAL THICKNESS: 1.2 MILLIMETERS NOMINAL MM
• DISTANCE FROM LOOP CENTER TO TONGUE END: 16.5 MILLIMETERS NOMINAL MM
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 11.0 MILLIMETERS NOMINAL MM
• MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR SINGLE LOOP DIAMETER 4.2 MILLIMETERS NOMINAL MM OVERALL WIDTH 10.0 MILLIMETERS NOMINAL MM MATERIAL THICKNESS 1.2 MILLIMETERS NOMINAL MM DISTANCE FROM LOOP CENTER TO TONGUE END 16.5 MILLIMETERS NOMINAL MM TONGUE HOLE TYPE ROUND, UNTHREADED CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 11.0 MILLIMETERS NOMINAL MM MATERIAL PLASTIC POLYAMIDE NYLON OVERALL LOOP INSIDE DIAMETER 9.5 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
SUBSTITUTES & CROSS-REFERENCES 2
5495469-005 Reference document Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
549469-005 Reference document Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM) No demilitarization required
Ready to buy H5P?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5P?
H5P is a CLAMP,LOOP.
What parts can replace H5P?
There are 2 known substitutes for H5P: 5495469-005, 549469-005. Substitute compatibility should be verified for your specific system.
What is the NSN for H5P?
H5P is cataloged in the U.S. Government catalog under NSN 5340-01-338-7001. This indicates validated use in U.S. government and defense supply chains.