PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H5C9
H5C9 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, special_features: DUMBELL ROLLERS; OIL HOLE AND GROOVE IN OUTER RACE AND ROLLER RETAINMENT RING, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-079-9979, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5C9
NSN: 3110-00-079-9979
FSC: 3110
CAGE: 88853 — BCP CONSTRUCTION PRODUCTS DIV OF TEREX CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
special_featuresDUMBELL ROLLERS; OIL HOLE AND GROOVE IN OUTER RACE AND ROLLER RETAINMENT RING
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-079-9979
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H5C9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESDUMBELL ROLLERS; OIL HOLE AND GROOVE IN OUTER RACE AND ROLLER RETAINMENT RING
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
42-1100-500-130Interchangeable
interchangeable cross-reference
interchangeable
97DK047Interchangeable
interchangeable cross-reference
interchangeable
5212907Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-16305Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-163059X4-1/2X1-1/4INInterchangeable
interchangeable cross-reference
interchangeable
BANDW K-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H5C9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5C9?
H5C9 is a BEARING,ROLLER,NEEDLE.
What parts can replace H5C9?
There are 12 known substitutes for H5C9: 42-1100-500-130, 97DK047, 5212907 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H5C9?
H5C9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-079-9979. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5C9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026