PartsTable
Technical Data Sheet
PartsTable / COMPONENT / H5893DPCHD48
H5893DPCHD48 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, overall_outside_diameter: 1.0000 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5893DPCHD48
NSN: 3110-00-112-5892
FSC: 3110
CAGE: 92772 — THE WHITMOR CO. INC. DIV THE WHITMOR COMAPNY INC. (USA)
SPECIFICATIONS
bore_diameter0.7500 INCHES NOMINAL IN
alignment_typeRIGID
overall_outside_diameter1.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5892
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: H5893DPCHD48 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
BORE DIAMETER0.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1509-113Interchangeable
interchangeable cross-reference
interchangeable
28500Interchangeable
interchangeable cross-reference
interchangeable
2A3483Interchangeable
interchangeable cross-reference
interchangeable
667923Interchangeable
interchangeable cross-reference
interchangeable
613441-3Interchangeable
interchangeable cross-reference
interchangeable
106Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy H5893DPCHD48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5893DPCHD48?
H5893DPCHD48 is a BEARING,ROLLER,NEEDLE.
What parts can replace H5893DPCHD48?
There are 14 known substitutes for H5893DPCHD48: 1509-113, 28500, 2A3483 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H5893DPCHD48?
H5893DPCHD48 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5893DPCHD48

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026