PartsTable
Technical Data Sheet
Download PDF

H5634 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H5634: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.531 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN, overall_diameter: 0.750 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-262-3000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5634
NSN: 5310-00-262-3000
FSC: 5310 — Nuts and Washers
CAGE: 42271 — KENOSHA AUTOMOTIVE PLANT SUB OF AMERICAN MOTORS CORP (USA)
SPECIFICATIONS
materialCOPPER OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.531 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN
overall_diameter0.750 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-262-3000
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H5634 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.531 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.531 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN
THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
FF-W-92BReference document
Same NSN cross-reference
Reference document — Identification reference
1P7Reference document
Same NSN cross-reference
Reference document — Secondary reference
55944Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5308281Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
713057Reference document
Same NSN cross-reference
Reference document — Secondary reference
X1026T2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H5634?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5634?
H5634 is a WASHER,FLAT.
What parts can replace H5634?
There are 7 known substitutes for H5634: FF-W-92B, 1P7, 55944 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H5634?
H5634 is cataloged in the U.S. Government catalog under NSN 5310-00-262-3000. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5634