PartsTable
Technical Data Sheet
Download PDF

H5470253A-386 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

H5470253A-386: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include overall_length: 7.4550 INCHES NOMINAL IN, special_features: 4 X 0.125" THRU HOLES INTO BORE I.D. 90 DEGREES APART., style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 3.0190 INCHES NOMINAL IN, body_outside_diameter: 3.5120 INCHES NOMINAL IN, end_item_identification: NSSN CALSS SUBMARINE,30 INCH UPPER HATCH HINGE DETAIL.

IN. This part is cataloged in the U.S. Government catalog under NSN 3120-01-674-5902, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H5470253A-386
NSN: 3120-01-674-5902
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
overall_length7.4550 INCHES NOMINAL IN
special_features4 X 0.125" THRU HOLES INTO BORE I.D. 90 DEGREES APART.
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter3.0190 INCHES NOMINAL IN
body_outside_diameter3.5120 INCHES NOMINAL IN
end_item_identificationNSSN CALSS SUBMARINE,30 INCH UPPER HATCH HINGE DETAIL. IN
part_name_assigned_by_controlling_agencyBEARING SPACER,GUIDE SLEEVE.
NSN3120-01-674-5902
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: H5470253A-386 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 3.5120 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 3.0190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BODY OUTSIDE DIAMETER3.5120 INCHES NOMINAL IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH7.4550 INCHES NOMINAL IN
BODY INSIDE DIAMETER3.0190 INCHES NOMINAL IN
SPECIAL FEATURES4 X 0.125" THRU HOLES INTO BORE I.D. 90 DEGREES APART.
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING SPACER,GUIDE SLEEVE.
END ITEM IDENTIFICATIONNSSN CALSS SUBMARINE,30 INCH UPPER HATCH HINGE DETAIL. IN
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 1
167-7106789-386Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H5470253A-386?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5470253A-386?
H5470253A-386 is a BEARING,SLEEVE.
What parts can replace H5470253A-386?
There is 1 known substitute for H5470253A-386: 167-7106789-386. Substitute compatibility should be verified for your specific system.
What is the NSN for H5470253A-386?
H5470253A-386 is cataloged in the U.S. Government catalog under NSN 3120-01-674-5902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H5470253A-386