PartsTable
Technical Data Sheet
Download PDF

H547-1903-33 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H547-1903-33: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL CASE, seal_width: 0.313 INCHES NOMINAL IN, construction: ONE-PIECE, outside_diameter: 2.627 INCHES NOMINAL IN, housing_bore_diameter: 2.623 INCHES NOMINAL IN, end_item_identification: OPERATOR GEAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-619-0077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H547-1903-33
NSN: 5330-01-619-0077
FSC: 5330 — Packing and Gasket Materials
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL CASE
seal_width0.313 INCHES NOMINAL IN
constructionONE-PIECE
outside_diameter2.627 INCHES NOMINAL IN
housing_bore_diameter2.623 INCHES NOMINAL IN
end_item_identificationOPERATOR GEAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
cross-sectional_shape_styleDUAL LIP
part_name_assigned_by_controlling_agencyCRWA1 LIP SEAL
NSN5330-01-619-0077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H547-1903-33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.627 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: DUAL LIP
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.313 INCHES NOMINAL IN
OUTSIDE DIAMETER2.627 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEDUAL LIP
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCRWA1 LIP SEAL
END ITEM IDENTIFICATIONOPERATOR GEAR
MATERIALSTEEL SPRING
MATERIALSTEEL CASE
MATERIALRUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 3
19777Reference document
Same NSN cross-reference
Reference document — Secondary reference
7383858-H5471903-033Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H547-0001-H5471903-033Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H547-1903-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H547-1903-33?
H547-1903-33 is a SEAL,PLAIN.
What parts can replace H547-1903-33?
There are 3 known substitutes for H547-1903-33: 19777, 7383858-H5471903-033, H547-0001-H5471903-033. Substitute compatibility should be verified for your specific system.
What is the NSN for H547-1903-33?
H547-1903-33 is cataloged in the U.S. Government catalog under NSN 5330-01-619-0077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H547-1903-33