PartsTable
Technical Data Sheet
Download PDF

H54656-8S — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H54656-8S: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: COBALT ALLOY OVERALL, nut_style: SPLINE, nut_height: 0.675 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-179-0861, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H54656-8S
NSN: 5310-01-179-0861
FSC: 5310 — Nuts and Washers
CAGE: 16563 — CONTITECH USA, INC. (USA)
SPECIFICATIONS
materialCOBALT ALLOY OVERALL
nut_styleSPLINE
nut_height0.675 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
width_across_flats0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch20
material_document_and_classificationAMS 5844 OR AMS 5842 OR AMS 6532 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-179-0861
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H54656-8S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5844 OR AMS 5842 OR AMS 6532 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.675 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5844 OR AMS 5842 OR AMS 6532 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.675 INCHES MAXIMUM IN
NUT STYLESPLINE
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 5
HS4133-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
EWNM26-820Reference document
Same NSN cross-reference
Reference document — Secondary reference
94288-820Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SII1262-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PBF1447-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H54656-8S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H54656-8S?
H54656-8S is a NUT,SELF-LOCKING,SPLINE.
What parts can replace H54656-8S?
There are 5 known substitutes for H54656-8S: HS4133-8, EWNM26-820, 94288-820 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H54656-8S?
H54656-8S is cataloged in the U.S. Government catalog under NSN 5310-01-179-0861. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H54656-8S