PartsTable / COMPONENT / H5416
H5416
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.500 INCHES NOMINAL IN, aperture_width: 3.500 INCHES NOMINAL IN, overall_length: 13.063 INCHES NOMINAL IN, aperture_length: 12.063 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-4156, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
H5416
NSN: 5330-00-179-4156 FSC: 5330 CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
material PAPER AND GLUE AND GLYCERIN OVERALL hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 4.500 INCHES NOMINAL IN aperture_width 3.500 INCHES NOMINAL IN overall_length 13.063 INCHES NOMINAL IN aperture_length 12.063 INCHES NOMINAL IN inside_corner_radius 0.750 INCHES NOMINAL IN outside_corner_radius 0.375 INCHES NOMINAL IN cross-sectional_thickness 0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL center_to_center_distance_between_bolt_holes_along_width 3.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN NSN 5330-00-179-4156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: H5416
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
• MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
• MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE LENGTH: 12.063 INCHES NOMINAL IN
• CROSS-SECTIONAL THICKNESS: 0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 6.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS 0.375 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL MATERIAL PAPER AND GLUE AND GLYCERIN OVERALL CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION APERTURE LENGTH 12.063 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 6.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OVERALL LENGTH 13.063 INCHES NOMINAL IN INSIDE CORNER RADIUS 0.750 INCHES NOMINAL IN OVERALL WIDTH 4.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
911501-2 Interchangeable interchangeable cross-reference
interchangeable
5416 Interchangeable interchangeable cross-reference
interchangeable
F5416 Interchangeable interchangeable cross-reference
interchangeable
504-0479-003 Interchangeable interchangeable cross-reference
interchangeable
28075B Interchangeable interchangeable cross-reference
interchangeable
1650PL0658194 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy H5416?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H5416?
H5416 is a GASKET.
What parts can replace H5416?
There are 16 known substitutes for H5416: 911501-2, 5416, F5416 and 13 more. Substitute compatibility should be verified for your specific system.
Is H5416 still available?
H5416 is currently cancelled.