PartsTable
Technical Data Sheet
Download PDF

H513-1304-6 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

H513-1304-6: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OVERALL, overall_width: 1.125 INCHES NOMINAL IN, overall_height: 1.125 INCHES NOMINAL IN, overall_length: 7.200 INCHES NOMINAL IN, shear_strength: 140000 DOUBLE POUNDS PER SQUARE INCH, special_features: TWO HOLES THRU .41 X 90 DEGREES & ONE HOLE COUNTERBORE .406 THRU .44 X 90 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-497-1485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H513-1304-6
NSN: 5315-01-497-1485
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OVERALL
overall_width1.125 INCHES NOMINAL IN
overall_height1.125 INCHES NOMINAL IN
overall_length7.200 INCHES NOMINAL IN
shear_strength140000 DOUBLE POUNDS PER SQUARE INCH
special_featuresTWO HOLES THRU .41 X 90 DEGREES & ONE HOLE COUNTERBORE .406 THRU .44 X 90 DEGREES
style_designatorPLAIN
key_chamfer_angle45.0 DEGREES NOMINAL
key_chamfer_length0.120 INCHES NOMINAL IN
starting_edge_shapeCHAMFERED
end_item_identificationDIVE PLANE ASSEMBLY; LOS ANGELES CLASS SSN (688)
material_document_and_classificationMIL-S-24093 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-497-1485
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: H513-1304-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-24093 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
KEY CHAMFER LENGTH: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.125 INCHES NOMINAL IN
KEY CHAMFER ANGLE45.0 DEGREES NOMINAL
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-24093 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH7.200 INCHES NOMINAL IN
OVERALL WIDTH1.125 INCHES NOMINAL IN
KEY CHAMFER LENGTH0.120 INCHES NOMINAL IN
SPECIAL FEATURESTWO HOLES THRU .41 X 90 DEGREES & ONE HOLE COUNTERBORE .406 THRU .44 X 90 DEGREES
SHEAR STRENGTH140000 DOUBLE POUNDS PER SQUARE INCH
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H513-1304-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H513-1304-6?
H513-1304-6 is a KEY,MACHINE.
What is the NSN for H513-1304-6?
H513-1304-6 is cataloged in the U.S. Government catalog under NSN 5315-01-497-1485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H513-1304-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.