PartsTable
Technical Data Sheet
Download PDF

H511-0103-11 — RUDDER STOCK ASSEMBLY

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

H511-0103-11: RUDDER STOCK ASSEMBLY.

The RUDDER STOCK ASSEMBLY is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, thickness: 6.630 INCHES NOMINAL IN, bore_diameter: 23.0530 INCHES MINIMUM AND 23.0630 INCHES MAXIMUM IN, outside_diameter: 30.000 INCHES MINIMUM AND 30.004 INCHES MAXIMUM IN, style_designator: ROUND SECTIONAL, end_item_identification: RUDDER STOCK; LOS ANGELES CLASS SUBMARINE. This part is cataloged in the U.S.

Government catalog under NSN 3040-01-495-6234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H511-0103-11
NSN: 3040-01-495-6234
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialCOPPER ALLOY
thickness6.630 INCHES NOMINAL IN
bore_diameter23.0530 INCHES MINIMUM AND 23.0630 INCHES MAXIMUM IN
outside_diameter30.000 INCHES MINIMUM AND 30.004 INCHES MAXIMUM IN
special_featuresRUDDER CARRIER COLLAR IS MADE UP OF 2 HALVES: 561-6985067 PN 11 (PORT) AND PN 12 (STARBOARD) ARE THE SAME, FABRICATED FROM ONE CASTING. PN 11 HALVE IS CONNECTED TO PN 12 USING 2 TAPPERED PINS PN 35.
style_designatorROUND SECTIONAL
end_item_identificationRUDDER STOCK; LOS ANGELES CLASS SUBMARINE
part_name_assigned_by_controlling_agencyRUDDER CARRIER
NSN3040-01-495-6234
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RUDDER STOCK ASSEMBLY TITLE COMPONENT PN H511-0103-11 MFR RUDDER STOCK ASSEMBLY
KEY FEATURES
•
STYLE DESIGNATOR: ROUND SECTIONAL
•
OUTSIDE DIAMETER: 30.000 INCHES MINIMUM AND 30.004 INCHES MAXIMUM IN
•
BORE DIAMETER: 23.0530 INCHES MINIMUM AND 23.0630 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY
•
THICKNESS: 6.630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORROUND SECTIONAL
OUTSIDE DIAMETER30.000 INCHES MINIMUM AND 30.004 INCHES MAXIMUM IN
SPECIAL FEATURESRUDDER CARRIER COLLAR IS MADE UP OF 2 HALVES: 561-6985067 PN 11 (PORT) AND PN 12 (STARBOARD) ARE THE SAME, FABRICATED FROM ONE CASTING. PN 11 HALVE IS CONNECTED TO PN 12 USING 2 TAPPERED PINS PN 35.
PART NAME ASSIGNED BY CONTROLLING AGENCYRUDDER CARRIER
END ITEM IDENTIFICATIONRUDDER STOCK; LOS ANGELES CLASS SUBMARINE
BORE DIAMETER23.0530 INCHES MINIMUM AND 23.0630 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY
THICKNESS6.630 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
H511-0103-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H511-0103Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
561-6985067Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
561-6985067-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy H511-0103-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H511-0103-11?
H511-0103-11 is a RUDDER STOCK ASSEMBLY.
What parts can replace H511-0103-11?
There are 4 known substitutes for H511-0103-11: H511-0103-12, H511-0103, 561-6985067 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for H511-0103-11?
H511-0103-11 is cataloged in the U.S. Government catalog under NSN 3040-01-495-6234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H511-0103-11