PartsTable
Technical Data Sheet
Download PDF

H50SWB — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

H50SWB: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.281 INCHES NOMINAL IN, overall_height: 0.719 INCHES NOMINAL IN, special_features: ONE SLOT 0.203, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-054-5246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
H50SWB
NSN: 5340-00-054-5246
FSC: 5340 — Hardware, Commercial
CAGE: 03743 — EGS ELECTRICAL GROUP APPLETON DIV (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.281 INCHES NOMINAL IN
overall_height0.719 INCHES NOMINAL IN
special_featuresONE SLOT 0.203
surface_treatmentCADMIUM OVERALL
distance_from_loop_center_to_end0.875 INCHES NOMINAL IN
NSN5340-00-054-5246
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: H50SWB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.875 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.719 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.875 INCHES NOMINAL IN
SPECIAL FEATURESONE SLOT 0.203
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
A42212-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy H50SWB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is H50SWB?
H50SWB is a CLIP,SPRING TENSION.
What parts can replace H50SWB?
There is 1 known substitute for H50SWB: A42212-1. Substitute compatibility should be verified for your specific system.
What is the NSN for H50SWB?
H50SWB is cataloged in the U.S. Government catalog under NSN 5340-00-054-5246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — H50SWB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.